Full Send Editorial
Guides for Better Builds.
Expert buying guides, technical explainers, installation advice and build inspiration for American performance cars, trucks and SUVs.
Bearings
How to Plan an Engine Build Before Ordering Parts
A successful engine build starts with measured components and a written system plan. Follow the sequence from goals and inspection through machinin...
Engine Bearings
Engine Bearings Explained: Sizes, Materials and Clearances
Engine bearings support the crankshaft on a pressurized oil film. Learn how size, housing geometry, journal measurement and clearance determine sel...
Engine Building
Piston Rings Explained: Types, Materials and Applications
Piston rings seal combustion pressure, control oil and transfer heat. Learn how ring type, material, bore finish and measured end gap work together.
Buying Guide
Forged Pistons Explained: Materials, Bore and Compression Ratio
Forged piston selection requires exact engine measurements and a complete rotating-assembly plan. Learn the specifications that must agree before m...
Boost Control
External vs. Internal Wastegates
Internal and external wastegates both regulate turbine-driving exhaust flow. Compare their packaging, capacity, routing and control requirements.
Buying Guide
How to Choose an Intercooler
Intercooler selection is a balance of cooling, pressure drop, external airflow and packaging. Learn what to compare beyond core dimensions.
Blow-Off Valves
Blow-Off Valve vs. Bypass Valve
Blow-off and bypass valves both release pressure when the throttle closes, but they route that air differently. Learn which architecture matches th...
Build Planning
Turbo Upgrade Supporting Mods: The Complete Planning Checklist
A turbocharger is only one part of a reliable power system. Plan engine health, fuel, cooling, calibration, drivetrain and monitoring before ordering.
Air Filters
When Should You Clean or Replace an Engine Air Filter?
Air-filter service depends on media, driving environment and inspection—not mileage alone. Learn what to check and when replacement is safer than...
Air Filters
Dry vs. Oiled Performance Air Filters
Dry and oiled performance filters use different media and service procedures. Compare their maintenance, environment and sensor considerations.
Air Filters
Direct-Fit vs. Universal Air Filters
Direct-fit filters replace a specified factory element, while universal filters require measured dimensions and a suitable intake design. Compare b...
Air Intake Systems
Cold Air Intake vs. Short-Ram Intake
Cold air and short-ram intakes place the filter in different environments. Compare temperature control, packaging, sound and maintenance before cho...